|
Sullivan Palatek D Series - 60Hz - 15, 20, 25, 30, & 40 HP Rotary Screw Air Compressors
D Series Air Compressors from Sullivan Palatek offer a compact design, direct drive, C-face flange mount positive alignment, and 5-year air end warranty
- Electric Motor: 208/230/460 volt (15-25 H.P.) 230/460 volt (30-40 H.P.) Nema T-frame, C-face, open drip proof squirrel cage induction type, energy efficient.
- Motor Starter: 230/460 volt (15-25 H.P.) 460 volt (30-40 H.P.), full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, ETL listed, solid state control circuit breaker protection and three phase overload with external reset and phase protection. Other voltages available.
- Protective Devices: Class 20 solid state overload relay, high temperature and over pressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized.
- Lube Fill & Level Elbow: One Piece lube fill elbow and level sight glass. Vented cap for pressure release when removing.
- HD Air Intake Filter: Oversized dry type, single stage with replaceable element
- Inlet/Check Valve: One piece housing for dependable performance and complete modulation
- Coupling & Drive: Compressor is flange mounted to motor C-face for positive alignment and direct driven.
- Controls Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control.
- Instrumentation: Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter and separator element differential gauges.
- Separator Tank: ASME coded 200 PSIG tank, relief valve, minimum pressure/check valve, high efficiency replaceable air/lube separator element.
- Auto/Dual Control: Compressor control that allows the unit to be operated in continuous run mode or with an automatic timed shut down. Auto control allows multiple machines to be operated in a lead-lag condition.
- Air Cooled Aftercooler: Double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature and reducing the discharge air temperature to within 15 degrees of ambient.
- Deluxe Gauge Panel: Deluxe gauge panel includes 2.5" liquid filled sump and line pressure gauges, 2.5" oil temperature gauge, with oil filter and separator differential pressure gauges.
D Series - 60Hz
|
|
Each compressor package comes standard with 230/460/575/3-60 ODP electric motor, air-cooled after-cooler to reduce discharge air temperatures, full voltage motor starter mounted and wired (wired for 230-3-60 voltage standard), dual control (AS&S and constant speed control), low sound/ full sheet metal enclosure, package pre-filter, 9000-hour rated Ultra Plus coolant, spin-on oil filter and separator element, A.S.M.E. coded horizontal receiver tank (tank mounted units only) with manual drain, and NEMA-1 electrical protection.
|
D Series: Model 15, 20, 25, 30, & 40HP
|
Base Mount |
Base Mount Enclosed |
|
| Model |
HP |
ACFM |
Max PSI |
dBA |
Suggested
Sell |
Suggested
Sell |
Shipping
Weight
(lbs.)
|
| 15D |
15 |
55 |
125 |
78 |
$8,855 |
$10,671 |
275 |
| H15D |
15 |
54
|
150 |
78 |
$9,053 |
$10,868 |
275 |
| 20D |
20 |
80
|
125 |
78
|
$9,817 |
$11,631 |
275 |
| H20D |
20
|
78 |
150 |
80
|
$10,013 |
$11,829
|
325 |
| HH20D |
20 |
53 |
175 |
80 |
$10,080 |
$11,895 |
325 |
| 25D |
25 |
110 |
125 |
88 |
$10,673 |
$12,488 |
325 |
| H25D |
25 |
95 |
150 |
88
|
$10,936
|
$12,752
|
425 |
| HH25D |
25 |
80 |
175 |
88 |
$10,936 |
$12,752
|
425 |
| 25D4 |
25 |
95
|
125 |
81 |
$10,894 |
$12,709
|
425 |
|
H25D4
|
25
|
95
|
150
|
81
|
$11,091
|
$12,905
|
|
|
30D7
|
30
|
115
|
125
|
88
|
$12,008
|
$13,824
|
|
|
H30D7
|
30
|
110
|
150
|
88
|
$12,205
|
$14,020
|
|
|
HH30D7
|
30
|
105
|
175
|
88
|
$12,273
|
$14,087
|
|
|
40D
|
40
|
166
|
125
|
92
|
$13,591
|
$15,732
|
|
|
H40D
|
40
|
115
|
150
|
92
|
$13,782
|
$15,923
|
|
|
HH40D
|
40
|
110
|
175
|
92
|
$13,847
|
$15,989
|
|
|
|
|
|